Shopping Cart

FREE shipping for the E3 CNC Router in the continental US

Credit Card Badges

Uploading  Grbl 1.1e on the E3 CNC router

Posted by Bob Wood on

This is a simplified instruction to help upload Grbl 1.1e on the E3 CNC router. We recommend you clear the EEPROM form the controller before you proceed. The instructions for this can be found on our blog here. Once the EEPROM is clear, please follow the steps below:

  1. Download Xloader 
  2. Download grbl hex file Grbl 1.1e
  3. Unzip Xloader to your desktop
  4. Put Grbl hex file in the Xloader directory
  5. Open Xloader    

UGS platform for Grbl

I recommend the Universal Gcode Sender Platform. for this version of Grbl.


Older Post Newer Post