KL7 Series Specifications

The KL Series 733 and 744 CNC Routers offer greater cutting area, and speed and feed capability without compromising resolution and accuracy. Let us know if you have questions.

 

 
  KL733 KL744
Material 12 mm 9 ply Baltic Birch 12 mm 9 ply Baltic Birch
Machine Size  58.2” x 51.7” X 37"  69.6” x 63.1” X 37"
Cutting Area 36” x 36” 48” x 48”
Router Spindle Makita RT0701C Makita RT0701C
Spindle RPMs 10k to 30k 10K to 30k
Processor Firmware GRBL v. 1.1 GRBL v. 1.1
Controller Uno Controller Uno Controller
Recommended Gcode Sender UGS Platform UGS Platform
X,Y Axis T5 x 15 mm Bell-Everman Servo Drive T5 x 15 mm Bell-Everman Servo Drive
Z Axis SFU 1204 Ball Screw SFU 1204 Ball Screw
Rail System Supported Rails, 3/8” Stress Proof Steel Supported Rails, 3/8” Stress Proof Steel
Power Supply AC Dual 48 VDC  7 Amps Dual 48 VDC  7 Amps
Input 110 VAC 110 VAC
Drive Motors NEMA 23 Servo  Closed Loop Quadrature Encoder NEMA 23 Servo  Closed Loop Quadrature Encoder
Holding  Torque Nm (425 oz. in.) Nm 3 (425 oz. in.)
Servo Resolution X and Y axes 0.001” (0.025 mm) 0.001” (0.025 mm)
Servo Resolution Z axis 0.00007” (0.002 mm) 0.00007” (0.002 mm)
Repeatability 0.002” to 0.004” 
(0.05 mm to 0.1 mm)
0.002” to 0.004” 
(0.05 mm to 0.1 mm)
Wire Management Drag Chain  Drag Chain 
Hardware Controls Hold, Resume, and Emergency Stop Hold, Resume, and Emergency Stop
Home Switches Hall Effect  with  Self-Squaring Gantry Hall Effect  with  Self-Squaring Gantry
Shipping weight  185 lbs (5 boxes) 202 lbs (5 boxes)
Older Post
Newer Post
Close (esc)

Router Bit Sets

BobsCNC now offers starter bit sets from BitsNBits.

Buy Here

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Shopping Cart

Your cart is currently empty.
Shop now